ADI Electronics MIL-DTL-24308
ADI Electronics MIL-DTL-24308 D-Sub connector comes with multiple shell sizes and pin-outs. Standard shell sizes are 9, 15, 25, 37 and 50 positions. Contacts are available in 20 AWG solder-pot, crimp or printed circuit contacts and intermate with MIL-DTL-24308 connectors.
Technical Characteristics:
- Standard contact termination accommodates 20 AWG wire at 5 Amps.
- Shells: Steel, cadmium plated with yellow chromate supplementary coating.
- Insulators: Commercial/Military – Green polyester per MIL-M-24519
- Contacts: Non-Removable and Removable
- Pins – copper alloy, gold over nickel plate.
- Sockets – phosphor bronze, gold over nickel plate.
- Float mounting available
- Rivets and Washers: Stainless-Steel
Mechanical Characteristics:
- Coupling: Friction and Locking Accessories
- Polarization: Keystone shaped shells
- Contact type: Captivated
- Termination: Solder pot, crimp removable and printed circuit (including right-angle)
Electrical Characteristics:
- Wire Size: 20 AWG
- Current Rating: 5 amps
- Voltage Rating: 1250 VAC at sea level – 375 VAC at 70,000 feet
- Voltage Drop: 20 AWG contacts: 55mV Max initial and 65 mV Max after corrosion at 7.5amps (when tested in accordance with MIL-C-24308)
